Product links may be affiliate links. Purchases through these links may earn us a commission. Current retailer prices and terms apply.

Best CPU Coolers for Core i5 13600K in 2026

Compare CPU coolers for Core i5 13600K, with key specifications, pros and cons, and practical advice for your next build.

Table of Contents

The Intel Core i5-13600K is a 14-core, 20-thread processor built on six Performance-cores and eight Efficient-cores, with P-cores boosting up to 5.1 GHz. Intel rates the chip at a 125 W base power (PL1) and a 181 W maximum turbo power (PL2), which means the stock cooling requirement is moderate, but a K-series overclock or an extended all-core workload pushes the actual heat output toward the top of that range. Selecting a cooler that keeps thermal headroom above 181 W protects sustained boost clocks and prevents thermal throttling during multi-threaded tasks such as rendering, compiling, or streaming.

This guide reviews six coolers suited to the i5-13600K: four dual-tower air coolers and two liquid all-in-one (AIO) units. Each option is evaluated on heat pipe or radiator design, fan performance, rated thermal dissipation capacity, RAM and case clearance, and how it compares with the other coolers on this list. All six coolers support the LGA1700 socket used by the i5-13600K, either natively or through an included mounting kit.

Air coolers remain the most cost-effective choice for the i5-13600K, since dual-tower designs with 120 mm or 140 mm fans routinely dissipate 250 W or more, well above the CPU’s 181 W turbo ceiling. Liquid coolers add a higher upfront cost but move heat away from the socket area more effectively during sustained loads and free up case airflow for other components such as the graphics card and VRM heatsinks.

The sections below cover each cooler’s specifications, its behavior with the i5-13600K, its pros and cons, and a comparison against the other listed coolers, followed by a buying guide for matching a cooler to a specific build.

THE SHORTLIST

This guide, at a glance

6 picks

Compare the products covered below, then explore the strengths, limitations, and specifications that matter to you.

  1. Thermalright Phantom Spirit 120 SE
    PICK 02Thermalright Phantom Spirit 120 SE

    Dual-tower air cooler · 7 x 6 mm copper (AGHP 4th gen)

    Read the review
  2. DeepCool AK620
    PICK 03DeepCool AK620

    Dual-tower air cooler · 6 x 6 mm nickel-plated copper

    Read the review
  3. Noctua NH-D15 G2
    PICK 04Noctua NH-D15 G2

    Dual-tower air cooler · 8 x 6 mm copper

    Read the review
  4. Arctic Liquid Freezer III 240
    PICK 05Arctic Liquid Freezer III 240

    All-in-one liquid cooler (240 mm) · 277 x 120 x 38 mm

    Read the review
  5. Arctic Liquid Freezer III 360
    PICK 06Arctic Liquid Freezer III 360

    All-in-one liquid cooler (360 mm) · 398 x 120 x 38 mm

    Read the review

Purchase links open Amazon. Confirm the exact model, price, availability, and seller terms before ordering.

Best CPU Coolers for Intel i5 13600K CPU

01

Thermalright Peerless Assassin 120 SE

Thermalright Peerless Assassin 120 SE
EXPLORE THE CURRENT LISTING

Pricing and availability on Amazon

View on Amazon: Thermalright Peerless Assassin 120 SE (opens in a new tab)
Pros & cons

Strengths

  • Rated TDP of up to 265 W comfortably exceeds the i5-13600K's 181 W turbo power.
  • AGHP heat pipe technology performs consistently regardless of case orientation.
  • Dual PWM fans deliver strong airflow at a low rated noise level of 25.6 dB(A).
  • Included thermal paste and mounting hardware simplify installation.
  • Priced well below most dual-tower competitors of similar performance.

Limitations

  • 155 mm height requires case clearance verification before purchase.
  • Aluminum-finished exterior offers a plainer appearance than nickel-plated competitors.
  • No integrated fan for VRM or RAM cooling, unlike AIO liquid options.
  • ARGB lighting is limited to specific SKU variants, not the base model.
Review notes

The Thermalright Peerless Assassin 120 SE is a dual-tower air cooler that uses six 6 mm copper heat pipes with Thermalright’s AGHP (Anti-Gravity Heat Pipe) technology, which maintains heat transfer efficiency regardless of the cooler’s mounting orientation. The heatsink measures 125 mm (L) x 135 mm (W) x 155 mm (H) and carries a manufacturer TDP rating of up to 265 W. Two TL-C12C-S PWM fans, each 120 x 120 x 25 mm, spin at 1,550 RPM ±10% and produce up to 66.17 CFM of airflow at a rated noise level of 25.6 dB(A) or lower. The cooler ships with Thermalright’s SS2 mounting system and TF-7 thermal paste, and it supports Intel LGA 115X/1200/1700 and AMD AM4 sockets.

Against the i5-13600K’s 181 W turbo power, the Peerless Assassin 120 SE’s 265 W rating provides roughly 84 W of thermal headroom, which is enough to sustain all-core boost clocks under typical case airflow without throttling. Independent testing from Tom’s Hardware found the Peerless Assassin 120 SE to be one of the strongest performers among budget dual-tower coolers, running quietly while matching or beating the thermal results of coolers priced significantly higher. Compared with the Thermalright Phantom Spirit 120 SE on this list, the Peerless Assassin uses one fewer heat pipe (six versus seven) and carries a slightly lower TDP ceiling, but its lower typical price makes it the stronger value pick for a non-overclocked or lightly overclocked i5-13600K build. Against the DeepCool AK620, the Peerless Assassin is marginally shorter at 155 mm versus 160 mm, which can matter in cases with tight side-panel clearance.

Specs & configuration
SpecificationDetail
Cooler typeDual-tower air cooler
Heat pipes6 x 6 mm copper (AGHP)
Dimensions (heatsink)125 x 135 x 155 mm
TDP ratingUp to 265 W
Fans2 x TL-C12C-S, 120 x 120 x 25 mm
Fan speed1,550 RPM ±10%
Airflow66.17 CFM (max)
Noise level≤25.6 dB(A)
Socket supportIntel 115X/1200/1700; AMD AM4/AM5
Weight~0.97 kg
02

Thermalright Phantom Spirit 120 SE

Thermalright Phantom Spirit 120 SE
EXPLORE THE CURRENT LISTING

Pricing and availability on Amazon

View on Amazon: Thermalright Phantom Spirit 120 SE (opens in a new tab)
Pros & cons

Strengths

  • 280 W TDP rating provides the largest thermal margin of the air coolers reviewed.
  • Seven heat pipes with fourth-generation AGHP technology improve heat transfer.
  • Asymmetrical fin-stack design improves clearance for tall RAM and the top PCIe slot.
  • Broad socket compatibility spans multiple current and legacy Intel and AMD platforms.
  • Competitive pricing relative to its rated cooling capacity.

Limitations

  • 154 mm height still requires case clearance checks in compact builds.
  • Standard S-FDB fan bearings are rated for a shorter service life than premium alternatives.
  • No RGB lighting on the base SE model.
  • Heavier than smaller single-tower coolers, adding installed stress on the motherboard socket area.
Review notes

The Thermalright Phantom Spirit 120 SE is a dual-tower air cooler built around seven 6 mm copper heat pipes using Thermalright’s fourth-generation AGHP technology. The heatsink measures 125 mm (L) x 110 mm (W) x 154 mm (H) and carries a manufacturer TDP rating between 105 W and 280 W. Two TL-C12B V2 PWM fans, sized 120 x 120 x 25 mm, run at 1,500 RPM ±10%, moving up to 66.17 CFM of air at a rated noise level of 25.6 dB(A) or lower. The heatsink’s asymmetrical fin-stack design shifts the front tower to improve clearance around the top PCIe slot and tall memory modules. The cooler supports Intel LGA 1150/1151/1155/1156/1200/1700 and AMD AM4/AM5 sockets.

The Phantom Spirit 120 SE’s 280 W TDP ceiling gives it roughly 99 W of headroom above the i5-13600K’s 181 W turbo power, the largest margin among the air coolers on this list. The extra heat pipe compared with the Peerless Assassin 120 SE translates into a measurable, if modest, thermal advantage under sustained all-core loads, particularly when the i5-13600K is overclocked past stock turbo limits. Compared with the DeepCool AK620, the Phantom Spirit 120 SE is narrower in depth (110 mm versus 138 mm with fans installed), which can ease installation in cases with limited side-panel clearance, though the AK620’s additional bulk contributes to slightly higher sustained cooling capacity in some independent reviews. Against the Noctua NH-D15 G2, the Phantom Spirit trades some absolute cooling performance for a substantially lower price.

Specs & configuration
SpecificationDetail
Cooler typeDual-tower air cooler
Heat pipes7 x 6 mm copper (AGHP 4th gen)
Dimensions (heatsink)125 x 110 x 154 mm
TDP rating105 W to 280 W
Fans2 x TL-C12B V2, 120 x 120 x 25 mm
Fan speed1,500 RPM ±10%
Airflow66.17 CFM (max)
Noise level≤25.6 dB(A)
Socket supportIntel 1150/1151/1155/1156/1200/1700; AMD AM4/AM5
Weight~0.9 kg
03

DeepCool AK620

DeepCool AK620
EXPLORE THE CURRENT LISTING

Pricing and availability on Amazon

View on Amazon: DeepCool AK620 (opens in a new tab)
Pros & cons

Strengths

  • 260 W TDP rating comfortably exceeds the i5-13600K's 181 W turbo power.
  • Six nickel-plated copper heat pipes resist corrosion better than uncoated alternatives.
  • Up to 47 mm of RAM clearance accommodates most tall memory kits.
  • Strong price-to-performance ratio confirmed across multiple independent reviews.
  • Broad legacy and current socket support extends usability across builds.

Limitations

  • 160 mm height and 138 mm depth require larger cases than the Thermalright options.
  • At 1,456 g, its weight is higher than most air coolers in its price class.
  • No RGB lighting on the standard black or white editions.
  • FK120 fans can become audible near their 1,850 RPM maximum under sustained full load.
Review notes

The DeepCool AK620 is a dual-tower air cooler equipped with six nickel-plated 6 mm copper heat pipes connected to a convex copper base plate. With both fans installed, the cooler measures 129 mm (W) x 138 mm (D) x 160 mm (H) and weighs approximately 1,456 g. DeepCool rates the AK620 for a maximum thermal design power of 260 W. Two FK120 PWM fans, each 120 mm, spin up to 1,850 RPM and mount with spring-tension clips fitted with rubber isolation pads to reduce vibration noise. RAM clearance reaches up to 47 mm with both fans installed, since the lower fin rows are cut away to accommodate taller memory heat spreaders. The cooler supports Intel LGA 2066/2011(3)/1700/1200/115X and AMD AM4/AM3(+)/AM2(+)/FM2(+)/FM1 sockets.

The AK620’s 260 W TDP rating leaves roughly 79 W of headroom above the i5-13600K’s 181 W turbo power, sufficient for stock and moderately overclocked operation. Tom’s Hardware and other independent reviewers have consistently placed the AK620 among the top-performing air coolers in its price bracket, with thermal results that rival costlier dual-tower models. Compared with the two Thermalright coolers on this list, the AK620 is both taller and deeper, which demands more case clearance but also correlates with slightly stronger sustained-load performance in several third-party benchmarks. Compared with the Noctua NH-D15 G2, the AK620 costs substantially less while trailing it in absolute thermal capacity and RAM clearance.

Specs & configuration
SpecificationDetail
Cooler typeDual-tower air cooler
Heat pipes6 x 6 mm nickel-plated copper
Dimensions (with fans)129 x 138 x 160 mm
TDP rating260 W max
Fans2 x FK120, 120 mm
Fan speedUp to 1,850 RPM
RAM clearanceUp to 47 mm
Noise levelRises audibly near maximum fan speed
Socket supportIntel 2066/2011(3)/1700/1200/115X; AMD AM4/AM3(+)/AM2(+)/FM2(+)/FM1
Weight~1,456 g
04

Noctua NH-D15 G2

Noctua NH-D15 G2
EXPLORE THE CURRENT LISTING

Pricing and availability on Amazon

View on Amazon: Noctua NH-D15 G2 (opens in a new tab)
Pros & cons

Strengths

  • Highest NSPR rating (228) that Noctua has assigned to any cooler, reflecting strong sustained thermal capacity.
  • 140 mm NF-A14x25r G2 fans achieve high airflow at a low rated 24.8 dB(A) noise level.
  • 59 mm RAM clearance in single-fan mode fits nearly all tall memory modules.
  • Six-year manufacturer warranty backs long-term reliability.
  • Comprehensive mounting kit supports current and several legacy Intel and AMD sockets.

Limitations

  • Retail price is significantly higher than any other cooler on this list.
  • 168 mm height demands a case with substantial CPU cooler clearance.
  • RAM clearance drops to 32 mm when both fans are installed, restricting some tall memory kits.
  • At up to 1.525 kg, its weight places additional mechanical load on the motherboard socket.
Review notes

The Noctua NH-D15 G2 is a premium dual-tower air cooler built with eight 6 mm copper heat pipes, a 20% increase in total fin surface area over the original NH-D15, and asymmetrical fin-stacks tuned for its new fans. The heatsink measures 168 mm (H) x 150 mm (W) x 127 mm (D) without fans, or 152 mm deep with both fans mounted, and weighs 1.18 kg without fans or 1.525 kg fully assembled. Noctua does not publish a single TDP figure for the NH-D15 G2, instead rating it at 228 on its internal Noctua Standardized Performance Rating (NSPR) scale, the highest score the company has assigned to any cooler to date; independent reviewers place its practical thermal ceiling at roughly 250 W or higher. Two NF-A14x25r G2 PWM fans, sized 140 x 140 x 25 mm, run at up to 1,500 RPM, delivering 155.6 m³/h (91.58 CFM) of airflow at 2.56 mmH2O static pressure and a rated noise level of 24.8 dB(A). RAM clearance reaches 59 mm in single-fan mode or 32 mm with both fans installed. The cooler ships with SecuFirm2+ mounting hardware, NT-H2 thermal paste, and support for Intel LGA 1851/1700/1200/1156/1155/1151/1150 and AMD AM5/AM4 sockets.

Even at its most conservative estimated thermal ceiling, the NH-D15 G2 provides well over 60 W of headroom above the i5-13600K’s 181 W turbo power, making thermal throttling unlikely under any single-CPU workload. Compared with the DeepCool AK620 and both Thermalright coolers, the NH-D15 G2 uses larger 140 mm fans instead of 120 mm units, which allows it to move more air at a lower rated noise level of 24.8 dB(A) versus the 25.6 dB(A) or higher figures of the 120 mm-fan coolers. Its 59 mm single-fan RAM clearance also exceeds the RAM clearance offered by the AK620 or either Thermalright model. This performance and clearance advantage comes at a notably higher price than the other air coolers on this list, positioning the NH-D15 G2 as the choice for builders prioritizing near-silent, maximum-headroom air cooling over cost.

Specs & configuration
SpecificationDetail
Cooler typeDual-tower air cooler
Heat pipes8 x 6 mm copper
Dimensions (with fans)168 x 150 x 152 mm
NSPR rating228 (Noctua’s internal scale)
Fans2 x NF-A14x25r G2, 140 x 140 x 25 mm
Fan speedUp to 1,500 RPM
Airflow155.6 m³/h (91.58 CFM)
Noise level24.8 dB(A)
RAM clearance59 mm (single fan) / 32 mm (dual fan)
Socket supportIntel 1851/1700/1200/1156/1155/1151/1150; AMD AM5/AM4
Weight1.18 kg (no fans) / 1.525 kg (with fans)
05

Arctic Liquid Freezer III 240

Arctic Liquid Freezer III 240
EXPLORE THE CURRENT LISTING

Pricing and availability on Amazon

View on Amazon: Arctic Liquid Freezer III 240 (opens in a new tab)
Pros & cons

Strengths

  • Dedicated 60 mm VRM fan cools the socket and motherboard voltage regulation area, a feature the air coolers on this list lack.
  • Six-year manufacturer warranty matches the longest coverage on this list.
  • Independent testing shows strong noise-normalized thermal performance against similarly priced 240 mm AIOs.
  • Integrated cable management routes fan wiring through the tubing sleeve, reducing visible cabling.
  • Included MX-6 thermal compound and contact frame simplify LGA1700 installation.

Limitations

  • Higher price than any of the four air coolers on this list.
  • Installation requires radiator and tubing placement, which is more involved than mounting an air cooler.
  • Some motherboards with oversized M.2 heatsinks near the socket may require a supplied alternate M.2 cooler for clearance.
  • Long-term reliability depends on pump lifespan, unlike the mechanically simpler air coolers.
Review notes

The Arctic Liquid Freezer III 240 is an all-in-one liquid cooler with a 240 mm aluminum radiator measuring 277 mm (L) x 120 mm (W) x 38 mm (H). Its in-house PWM-controlled pump operates between 800 and 2,800 RPM and uses a copper cold plate with micro-skived fins to improve contact with the CPU’s integrated heat spreader. A 60 mm PWM-controlled VRM fan built into the pump housing runs between 400 and 2,500 RPM to cool the motherboard’s voltage regulation area, a feature the four air coolers on this list do not offer. Two P12 PWM radiator fans, 120 mm each, spin between 200 and 1,800 RPM, producing 56.30 CFM (95.65 m³/h) of airflow at 2.20 mmH2O static pressure. The complete unit weighs 1,490 g and includes MX-6 thermal compound. Arctic backs the Liquid Freezer III 240 with a six-year warranty and supports Intel LGA 1851/1700 and AMD AM5/AM4 sockets natively, with LGA 1200/115X compatibility available through an optional mounting kit.

Arctic does not publish a fixed TDP ceiling for the Liquid Freezer III 240, but independent testing from outlets such as Hardware Canucks has shown it handling CPUs with turbo power draws well above the i5-13600K’s 181 W while maintaining lower noise-normalized temperatures than many competing 240 mm AIOs. Compared with the four air coolers on this list, the Liquid Freezer III 240 removes heat from the socket area more directly during extended full-load sessions and adds VRM airflow that no air cooler here provides, at the cost of a higher price and a more involved installation that includes radiator mounting and tube routing. Compared with its 360 mm sibling later in this list, the 240 model uses two radiator fans instead of three and a shorter radiator, giving it a smaller total heat-dissipation surface area in exchange for easier fitment in mid-tower cases with limited radiator mounting space.

Specs & configuration
SpecificationDetail
Cooler typeAll-in-one liquid cooler (240 mm)
Radiator dimensions277 x 120 x 38 mm
Radiator materialAluminum
Pump speed800–2,800 RPM (PWM)
VRM fan speed400–2,500 RPM (PWM)
Radiator fans2 x P12 PWM, 120 mm
Fan speed200–1,800 RPM
Airflow56.30 CFM (95.65 m³/h)
Static pressure2.20 mmH2O
Socket supportIntel 1851/1700 (1200/115X via kit); AMD AM5/AM4
Weight1,490 g
06

Arctic Liquid Freezer III 360

Arctic Liquid Freezer III 360
EXPLORE THE CURRENT LISTING

Pricing and availability on Amazon

View on Amazon: Arctic Liquid Freezer III 360 (opens in a new tab)
Pros & cons

Strengths

  • Largest total radiator surface area and fan count among the coolers on this list, maximizing sustained thermal headroom.
  • Shares the same 60 mm VRM fan as the 240 mm model, cooling the socket area during high loads.
  • Three P12 PWM fans allow lower per-fan speeds for a given thermal load, reducing noise at equivalent cooling output.
  • Six-year manufacturer warranty matches the 240 mm model.
  • Radiator-mounted heat rejection keeps warm air out of the case interior more effectively than air cooling.

Limitations

  • Requires a case with 360 mm radiator mounting space, which rules out many compact builds.
  • Highest price among the coolers reviewed here.
  • Installation and tubing routing take longer than mounting any air cooler on this list.
  • Heavier overall assembly increases the importance of secure radiator mounting hardware.
Review notes

The Arctic Liquid Freezer III 360 is the larger sibling of the 240 mm model, built around a 398 mm (L) x 120 mm (W) x 38 mm (H) aluminum radiator and cooled by three P12 PWM fans instead of two. The pump block shares the same specifications as the 240 mm version, operating between 800 and 2,800 RPM with a copper micro-skived cold plate, and includes the same 60 mm PWM-controlled VRM fan running between 400 and 2,500 RPM. Each of the three 120 mm radiator fans spins between 200 and 1,800 RPM, delivering 56.30 CFM (95.65 m³/h) of airflow per fan at 2.20 mmH2O static pressure. The fully assembled unit weighs approximately 1.87 kg. The Liquid Freezer III 360 ships with MX-6 thermal compound, an LGA1700/1851 contact frame, and a six-year warranty, and it supports the same Intel LGA 1851/1700 and AMD AM5/AM4 sockets as the 240 mm model, with LGA 1200/115X support available through an optional kit.

The additional radiator surface area and third fan give the Liquid Freezer III 360 more total heat-dissipation capacity than the 240 mm version, which translates into lower sustained temperatures or quieter fan curves for the same thermal load. Against the i5-13600K’s 181 W turbo power, this larger radiator provides more headroom for extended overclocked operation than any other cooler on this list, air or liquid. Compared with the Noctua NH-D15 G2, the Liquid Freezer III 360 offers a comparable or larger cooling capacity while directing more of that heat out of the case through front or top-mounted radiator fans rather than recirculating warm air inside the case, though it requires more available radiator mounting space, typically a 360 mm fan mount at the front or top of the case.

Specs & configuration
SpecificationDetail
Cooler typeAll-in-one liquid cooler (360 mm)
Radiator dimensions398 x 120 x 38 mm
Radiator materialAluminum
Pump speed800–2,800 RPM (PWM)
VRM fan speed400–2,500 RPM (PWM)
Radiator fans3 x P12 PWM, 120 mm
Fan speed200–1,800 RPM
Airflow56.30 CFM per fan (95.65 m³/h)
Static pressure2.20 mmH2O
Socket supportIntel 1851/1700 (1200/115X via kit); AMD AM5/AM4
Weight~1.87 kg

How to Choose a CPU Cooler for i5 13600K

Choose a CPU cooler for the i5-13600K by matching its rated thermal dissipation capacity to your intended power draw, checking case clearance for the cooler’s height or radiator size, and confirming RAM clearance for your memory kit. Any cooler rated above the i5-13600K’s 181 W maximum turbo power, such as the six models reviewed above, prevents thermal throttling under stock settings. Builders planning to overclock the i5-13600K past its stock turbo limits should prioritize coolers with the largest available thermal margin, such as the Thermalright Phantom Spirit 120 SE among air coolers or the Arctic Liquid Freezer III 360 among liquid coolers, since sustained power draw during an overclock can exceed 200 W. Case clearance determines which coolers physically fit: air coolers in this range require 154 mm to 168 mm of vertical clearance above the motherboard, while liquid coolers require a compatible 240 mm or 360 mm radiator mount, typically at the front or top of the case. RAM clearance matters most with tall, heat-spreader-equipped memory kits; the Noctua NH-D15 G2 and DeepCool AK620 offer the most clearance among the air coolers reviewed, while both Arctic liquid coolers avoid the issue entirely since their radiators mount away from the memory slots. Noise sensitivity favors larger fans running at lower speeds, which benefits the 140 mm-fan Noctua NH-D15 G2 or the three-fan Arctic Liquid Freezer III 360, both of which can reach a given cooling output at lower per-fan RPM than smaller dual-fan designs. Budget-focused builds pair well with the Thermalright Peerless Assassin 120 SE or DeepCool AK620, both of which deliver thermal headroom well above the i5-13600K’s power ceiling at a lower price than the liquid or premium air options on this list.

JOIN THE CONVERSATION

Leave a comment

Have a question or something to add? Share it with our editorial team. Comments are reviewed privately and are not published automatically.

Your email will not be published. See our privacy policy for how submissions are handled.

KEEP EXPLORING

A little more know-how.